Table Of Contents; Introduction; Safety Precautions And Working Techniques - Nilfisk-Advance C 100.6 User Manual

High pressure washer
Hide thumbs Also See for C 100.6:
Table of Contents

Advertisement

Contents
1
Introduction ................................................................ 3
2
3
4
Operating your high pressure washer ........................ 8
5
After using the pressure washer ................................. 9
6
Maintenance ............................................................. 10
7
Troubleshooting ........................................................ 10
8
Warranty Conditions ................................................. 11
9
Main technical Data .................................................. 12
10
Declaration of Conformity ......................................... 12

1 Introduction

1.1 Symbols used to mark instruction
All pictograms attached to the high pressure washer and its components are shown and ex-
plained in this manual.
Safety instructions marked with this symbol must be observed to prevent personal injury or
serious damage to property.
Caution where there is a risk of damaging the machine or its individual components.
This symbol indicates tips and instructions to simplify work and to ensure a safe operation of
the high pressure washer.

2 Safety precautions and working techniques

Before starting up your machine for the fi rst time, this instruction manual must be read through
carefully. Save the instructions for later use.
• Inhalation of aerosols can be hazardous to health.
• Where applicable use a device in order to avoid or reduce aerosols production, e.g., a shield
covering the nozzle.
• For protection against aerosols use a respiratory mask of class FFP 2 or higher.
• The high water pressure generated by the machine and the power connection are particular
sources of danger.
• Do not let people who have not been trained in the use of a machine nor read the instruction
manual ope rate the machine.
• Minors should never be allowed to use the machine - except for young trainees over the age
of 16, when working under supervision.
• Before starting up your machine please check it carefully for any defects. If you fi nd any, do
not start up your machine, contact your Nilfi sk distributor. The insulation of the electric cable
should be faultless and without any cracks. If the electric cable is damaged, an authorized
Nilfi sk di stributor should replace it.
• The operator and anyone in the immediate vicinity of the site of cleaning should take action
to protect themselves from being struck by debris dislodged during operation.
• Always unplug the power plug before cleaning or maintenance and when replacing parts or
converting the machine to another function.
• Observe the national safety regulations issued, for example, by the employers liability insu-
Original Instructions
WARNING!
EN
DA
NO
SV
FI
DE
FR
NL
IT
ES
PT
EL
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

C 110.4C 110.4 x-traC 105.6C 120.6 x-tra

Table of Contents