Table 1: TP-219HD XGA/HD Line Transmitter/Switcher Features Table 2: TP-219HD (Underside Panel) Features Table 3: TP-220HD XGA/HD Line Receiver/DA Features Table 4: TP-220HD (Underside Panel) Features Table 5: CAT 5 PINOUT Table 6: Technical Specifications of the TP-219HD and TP-220HD Setup...
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Step 1: Connect the inputs and outputs - see section 5 TP-220HD TP-219HD: Connect the TP-219HD: Connect the inputs inputs TP-220HD: Connect the TP-220HD: Connect the outputs outputs Connect the TP-219 to Connect the TP-219 to the TP-220 via the CAT 5...
HDTV signals up to 1080p. It takes one of two inputs as selected by the user and converts it to a twisted pair signal. The TP-220HD is a high-performance twisted pair receiver for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to 1080p.
We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
Table 1: TP-219HD XGA/HD Line Transmitter/Switcher Features Feature Function LINE OUT RJ-45 Connector Connect to the LINE IN RJ-45 connector on the TP-220HD INPUT 1 15-pin HD Connector Connect to the first XGA/HD source INPUT 2 15-pin HD Connector Connect to the second XGA/HD source...
VS Switch Slide the switch up (to NORMAL) to retain the polarity Slide the switch down to change the VS polarity to NEGATIVE polarity 1 By default, both switches are set to NORMAL 2 Downgoing syncs KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Your XGA/HD Line Transmitter/Switcher and Receiver/DA Your TP-220HD Figure 3 Table 3 define the TP-220HD: Figure 3: TP-220HD XGA/HD Line Receiver/DA Table 3: TP-220HD XGA/HD Line Receiver/DA Features Feature Function LINE IN RJ-45 Connector Connect to the LINE OUT RJ-45 connector on the TP-219HD...
TP-220HD XGA/HD – Line Receiver/DA to configure an XGA/HD DA system. This will let you transmit one selected computer graphics/HD signal to two displays via long line CAT 5 UTP cabling. To connect the TP-219HD to the TP-220HD, as the example in Figure 5 illustrates, do the following: 1.
Page 11
2 Alternatively, you can connect an HD acceptor, see section 3 By default, both switches are set to normal (see Figure 4 Table 4 If you cannot connect the power to both the TP-219HD and TP-220HD, you can just connect the power to one of them...
Connecting an HD System When connecting a high definition source, as illustrated in Figure 6, use a breakout cable such as the Kramer C-GM/3RVF. If you have a VGA to a 5BNC cable, use the RGB wires only. XGA Connector PINOUT Signal...
Technical Specifications Technical Specifications Table 6 includes the technical specifications Table 6: Technical Specifications of the TP-219HD and TP-220HD Setup TP-219HD TP-220HD INPUTS: 2 XGA/HD on 15-pin HD connectors 1 CAT 5 IN on an RJ-45 connector OUTPUTS: 1 CAT 5 OUT on an RJ-45 connector 2 XGA/HD on 15-pin HD connectors MAX.
Page 15
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.