Tables Table 1: TP-219HD XGA / HD Line Transmitter / Switcher Features Table 2: TP-219HD (Underside Panel) Features Table 3: TP-220HD XGA / HD Line Receiver / DA Features Table 4: TP-220HD (Underside Panel) Features Table 5: CAT5 PINOUT Table 6: Technical Specifications of the TP-219HD and TP-220HD Setup...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction...
Page 4
Connect the acceptors to the TP-220HD IN 2 If necessary, set the polarity of both machines using the underside switches TP-220HD Display 2 TP-219HD Computer Computer Graphics Graphics Source 1 Source 2 Connect the CAT5 cable KRAMER: SIMPLE CREATIVE TECHNOLOGY...
The power connect feature, see section 3.1 Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see section 3.2 A summary of the TP-219HD / TP-220HD, see section 3.3 Recommendations for achieving the best performance, see section 3.4 3.1 About the Power Connect Feature The Power Connect feature lets you power a transmitter / receiver system by connecting just one power adapter—...
TP-219HD/TP-220HD away from moisture, excessive sunlight and dust 1 The TP-219HD and TP-220HD accept high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p 2 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector...
This section describes the: TP-219HD XGA / HD – Line Transmitter / Switcher, see section 4.1 TP-220HD XGA / HD – Line Receiver / DA, see section 4.2 4.1 Your TP-219HD Figure 1, Figure 2, and Table 1 define the TP-219HD:...
Your XGA / HD Line Transmitter / Switcher and Receiver / DA Table 1: TP-219HD XGA / HD Line Transmitter / Switcher Features Feature 12V DC INPUT 2 HD15F Connector INPUT 1 HD15F Connector LINE OUT RJ-45 Connector Connect INPUT SELECTOR button...
Your XGA / HD Line Transmitter / Switcher and Receiver / DA 4.2 Your TP-220HD Figure 4, Figure 5, and Table 3 define the TP-220HD: Top Side Panel Lower Side Panel Figure 4: TP-220HD XGA / HD Line Receiver / DA...
Your XGA / HD Line Transmitter / Switcher and Receiver / DA Table 3: TP-220HD XGA / HD Line Receiver / DA Features Feature 12V DC OUTPUT 2 HD15F Connector OUTPUT 1 HD15F Connector LINE IN RJ-45 Connector EQ. Trimmer...
5 Alternatively, you can connect an HD acceptor, see section 5.1 6 By default, both switches are set to normal (see Figure 6 and Table 4) 7 If you cannot connect the power to both the TP-219HD and TP-220HD, you can just connect the power to one of them the:...
5.1 Connecting an HD System When connecting a high definition source, as illustrated in Figure 8, use a breakout cable such as the Kramer C-GM/3RVF. If you have a VGA to a 5BNC cable, use the RGB wires only. XGA Connector PINOUT...
Connecting the TP-219HD and TP-220HD 5.2 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors Table 5 and Figure 9 define the UTP CAT5 PINOUT, using a straight pin-to- pin cable with RJ-45 connectors: Table 5: CAT5 PINOUT EIA /TIA 568A...
Technical Specifications Table 6 includes the technical specifications Table 6: Technical Specifications of the TP-219HD and TP-220HD Setup TP-219HD INPUTS: 2 XGA / HD on HD15F connectors OUTPUTS: 1 CAT5 OUT on an RJ-45 connector MAX. OUTPUT LEVEL: 1.5Vpp RESOLUTION: Up to UXGA, up to 1080P DIFF.
Page 16
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 17
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.