Recommendations for Achieving the Best Performance Your TP-305A UXGA - Audio - RS-232 Line Receiver / DA The TP-305A UXGA - Audio - RS-232 Line Receiver / DA Underside Configuring the TP-305A UXGA - Audio - RS-232 Line Receiver / DA...
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction...
Page 4
Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Recommendations for achieving the best performance, see section 3.4 3.1 Your TP-305A UXGA - Audio - RS-232 Line Receiver / DA The TP-305A UXGA - Audio - RS-232 Line Receiver / DA receives a CAT 5 signal from a transmitter CAT 5 cables).
Your TP-305A UXGA - Audio - RS-232 Line Receiver / DA 3.3 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) The decision whether to use shielded twisted pair (STP) cable or unshielded twisted pair (UTP) cable depends on the nature of the application.
Your TP-305A UXGA - Audio - RS-232 Line Receiver / DA Figure 1: TP-305A UXGA Table 1: TP-305A Feature POWER Switch LINK LED Trimmer LEVEL Trimmer LINE IN RJ-45 Connector UXGA OUT 15-pin HD Connector LINE OUTPUT RJ-45 Connectors AUDIO OUT ANALOG 3.5mm...
Your TP-305A UXGA - Audio - RS-232 Line Receiver / DA 4.1 The TP-305A UXGA - Audio - RS-232 Line Receiver / DA Underside Figure 2 and Table 2 define the underside of the TP-305A Figure 2: TP-305A Underside 1 By default, both switches are set to NORMAL...
2 Using up to 300ft (100m) of UTP cabling 3 Switch OFF the power on each device before connecting it to your TP-305A. After connecting your TP-305A, switch on its power and then switch on the power on each device 4 Not supplied.
Configuring the TP-305A UXGA - Audio - RS-232 Line Receiver / DA 3. Connect the LINE OUTPUT CAT 5 connectors as follows The LINE OUTPUT 1 RJ-45 connector on the TP-305A to the LINE IN RJ-45 connector on a TP-124...
Configuring the TP-305A UXGA - Audio - RS-232 Line Receiver / DA 5.2 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 4 define the UTP CAT 5 PINOUT, using a straight pin to...
LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in Figure 6. 6. On each TP-305A unit, connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity. Connecting Several TP-305A Units...
Connecting Several TP-305A Units Transmitter TP-122 TP-122 TP-122 Figure 6: Distributing the Signal to 17 Receivers T P -3 0 5 A TP-46 TP-46 T P -3 0 5 A TP-124 T P -3 0 5 A TP-124 T P -3 0 5 A...
Technical Specifications Table 5 includes the technical specifications of the TP-305A: Table 5: Technical Specifications of the TP-305A INPUT: OUTPUTS: MAX. OUTPUT LEVEL: POWER OUTPUTS: RESOLUTION: BANDWIDTH: SAMPLING RATE FOR S/PDIF: S/N RATIO: TOTAL GAIN: TND+N: POWER SOURCE: DIMENSIONS: WEIGHT:...
Page 15
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the TP-305A and is the answer not in the manual?
Questions and answers