Remove the power supply blank.
2.
WARNING:
power cords to uninstalled power supplies.
Slide the power supply into the power supply bay until the release/lock lever clicks, securing the power
3.
supply.
Connect the power cord to the power supply.
4.
Using the retaining clip shipped with the server, secure the power cord to the power supply handle.
5.
Securing the cord will ensure enough slack.
Connect the power cord to the AC power source.
6.
Be sure that the power supply LED is illuminated green
7.
Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
To reduce the risk of electric shock or damage to the equipment, do not connect AC
("Rear panel LEDs and
buttons" on page 10).
Hardware options installation 69