Remove The Dimm Baffle - HP ProLiant ML350 User Manual

Remove the large redundant fan air baffle.
4.

Remove the DIMM baffle

Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
3.
Remove the large redundant fan air baffle, if installed
4.
page 27).
Remove the DIMM baffle.
5.
("Open or remove the tower
("Remove the large redundant fan air
bezel" on page 25).
baffle" on
Operations 28