Pci-X Expansion Cage Option - HP ProLiant ML350 User Manual

G6
Hide thumbs Also See for ProLiant ML350:
Table of Contents

Advertisement

Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Connect any required external cables to the expansion board. Refer to the documentation that ships
11.
with the expansion board.

PCI-X expansion cage option

The PCI-X expansion cage option converts one PCI Express slot into two PCI-X slots for additional expansion
board capability. The PCI-X expansion cage does not support expansion boards with internal cabling
requirements.
This option provides health monitoring of the riser fans which appear as fans 5 and 6.
In addition, both expansion boards installed in the PCI-X expansion cage appear as slots 1 and 2.
To install the component:
CAUTION:
remove all AC power cords before removing or installing the PCI-X expansion cage.
Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Remove the server from the rack (on page 25).
o
Remove the access panel (on page 26).
3.
Remove the two T-10 screws from the rear panel, and then remove the rear access panel. Retain the
4.
screws for securing the PCI-X expansion cage.
To prevent damage to the server or expansion boards, power down the server and
("Open or remove the tower
Hardware options installation 72
bezel" on page 25).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml350 g6

Table of Contents