Location And Function Of Controls - LG CED-8041B Owner's Manual

DirectCD TM v2.5b(s)
Front Panel

Location and Function of Controls

Headphone Jack Volume
1. Disc tray
This is the tray for the disc. Place the disc on the ejected disc tray, then
lightly push the tray (or push the eject button) and the CD will be loaded.
NOTE: Don't pull out or push in the disc tray forcibly. This might cause
damage to the loading section of the drive.
2. Stop/Eject button
Press this button to open the CD tray.
This button works only when power is supplied to the drive.
If an Audio CD is playing, pressing this button will stop it, and pressing it
again will open the tray.
3. Play/Skip button
When an Audio CD is in the disc drawer, pressing this button will start
playing Audio CDs from the first track. If an Audio CD is playing, pressing
this button will skip to the next track.
4. Volume control
Adjust the output volume of the headphone jack with this control. It can't
be used to adjust the output volume for the audio output connectors on
the rear panel.
NOTE : Turn the volume down before turning on the power. Sudden loud
noises can damage your hearing.
5. Headphone jack
This jack is for connecting headphones or mini-speakers.
6. Drive activity indicators
Two colored LEDs are used to indicate the operation of CD-R/RW Drive.
(1) Read
The orange color is displayed when the spindle motor begins the
Spin up operation: accessing data, reading data, playing Audio, and
up loading tray.
(2) Write
The green color is flashed during disc writing sessions.
5
Play/Skip Button
Drive Activity Indicators
Control
Emergency
Eject Hole
Disc Tray
Stop/Eject Button