LG CED-8041B Owner's Manual page 12

DirectCD TM v2.5b(s)
Mounting
the Drive
Connecting
the Power
Connector
1. Remove the 5 1
the manual for the computer for details.
2. Insert the drive unit into the bay. Do not apply excessive pressure
to the cables inside the computer.
3. Secure the drive with the screws provided. If there is not enough
space behind the drive, connect the IDE and other cables before
securing the drive.
NOTE : This is a general installation guide. If your PC hardware
appears different, please consult your hardware manual for installing
peripheral devices.
Connect the power cable from the computer's power supply to the
socket on the drive unit, fitting the connector firmly into the power in
connector.
If there is no spare power cable available in the computer, you will
have to purchase a splitter cable of a suitable type.
NOTE : Improper connection may damage the drive and void the
warranty.
8
" drive bay panel from the computer. Refer to
4
Beveled
edge up
POWER
+5 +12
GND
1
2