Installing the Drive
Before installing the drive, please note the following points.
You will need the following:
• A screw driver of a suitable size to fit the securing screws for
the drive unit.
• The manual for the computer, so you can find the mounting
positions for the IDE controller.
Turn off all peripheral appliances of the computer and the
computer itself, and disconnect their power cords from the wall
Discharge any static electricity on your person by touching the
computer covers, etc.
Make sure all peripheral devices of the computer and the computer
itself are turned off, and then remove the cover. Refer to the manual
for the computer for details about removing the cover.
NOTE : There may be sharp edges inside the computer so take care
to avoid injury.