Hood Sensor - HP Compaq Elite 8300 Maintenance & Service Manual

Hood sensor

The hood sensor is located on the bottom left of the computer (when viewed from behind).
Figure 7-85
To remove the hood sensor:
1. Prepare the computer for disassembly (see
2. Prepare the computer for disassembly (see
3. Remove the access panel (see
4. Remove the stand (see
5. Remove the lower panel (see
6. Remove the side panels (see
7. Remove the metal plate (see
8. Remove the power supply (see
9. Remove the system board (see
10. Remove the front bezel (see
11. Remove the display panel (see
12. Disconnect the hood sensor cable from the system board connector labeled HSENSE.
Hood sensor location
Stand on page
Lower panel on page
Side panels on page
Metal plate on page
Front bezel on page
Preparing to disassemble the computer on page
Preparing to disassemble the computer on page
Access panel on page
44).
46).
84).
47).
Power supply on page
System board on page
100).
Display panel on page
42).
86).
89).
105).
38).
38).
Hood sensor 111