2.
Remove the access panel (see
The battery can now be seen on the lower right side of the fan.
Figure 7-32
3.
To release the battery from its holder, squeeze the metal clamp that extends above one edge of
the battery. When the battery pops up, lift it out (1).
4.
To insert the new battery, slide one edge of the replacement battery under the holder's lip with
the positive side up. Push the other edge down until the clamp snaps over the other edge of the
battery (2).
Figure 7-33
60
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Access panel on page
Locating the battery
Removing and Replacing a coin cell battery (Type 2)
42).