HP Compaq Elite 8300 Maintenance & Service Manual page 114

7. Remove the power supply (see
8. Remove the speakers (see
9. Remove the side panels (see
10. Remove the front bezel (see
11. Disconnect the backlight cable from the display panel.
NOTE:
display panel kit.
Remove the backlight cable from the defective panel before sending the panel back to the
supplier.
Figure 7-79
106 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Power supply on page
Speakers on page
Side panels on page
Front bezel on page
Replace the backlight cable with the new backlight cable that comes with the new
Disconnecting the backlight cable from the display panel
86).
82).
84).
100).