NEC N8100-1668F User Manual page 481

12.
Select the type of installation you want.
[Custom (advanced)] is selected below.
13.
The screen of "Where do you want to install Windows?" is displayed.
NOTE:
Please go to step 16 when you do not use the RAID Controller,
and you have load the driver according to step 6-8.
Remove the Backup DVD-ROM or Windows Server 2008 DVD-ROM and set NEC
EXPRESSBUILDER DVD, and select [Load Driver].
Load Driver
To install the device driver needed to access your
hard drive, insert the installation media containing the
driver files, and then click OK.
NOTE: The installation media can be a floppy disk,
CD, DVD, or USB flash drive.
Click [Browse], and go to Step 14.
[Browse] [OK]
Installing Windows Server 2008 E-15
[Cancel]