NEC N8100-1668F User Manual page 228

5-90 Installing the Operating System with Express Setup
4.
Modify [Dump file:] in the [Write debugging information] group box.
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP
IMPORTANT:
Windows Server 2008 64-bit (x64) Edition
To specify "Complete Memory Dump" to write the debug

information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
Specify the drive where there is a free area more than the size of

"the memory capacity mounted on Express server + 300MB".
In case the mounted memory size exceeds 2GB due to the added

memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to adding
memory. Verify the size of the empty space in the debugging
information (memory dump) write destination drive.
Windows Server 2008 32-bit (x86) Edition
To specify "Complete Memory Dump" to write the debug

information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
Specify the drive where there is a free area more than the size of

"the memory capacity mounted on Express server + 300MB"(In
case the memory capacity is more than 2GB, a free area of
"2048+300MB" or more).
In case the mounted memory size exceeds 2GB due to the added

memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to adding
memory. Verify the size of the empty space in the debugging
information (memory dump) write destination drive.
5.
Click [Settings] on the [Performance] group box.
The [Performance Options] window appears.
6.
Click [Advanced] tab on the [Performance Options] window.
7.
Click [Change] on the [Virtual memory] group box.
8.
Uncheck the [Automatically manage paging file size for all drives] box, and check
[Custom size].