NEC N8100-1668F User Manual page 301

Displayed Error Message
C111 BMC SDR Repository
failure.
C112 BMC SEL device failure.
C113 BMC RAM test error.
C114 BMC Fatal hardware error.
C115 Management controller not
responding
C116 Private I2C bus not
responding.
C117 BMC internal exception
C118 BMC A/D timeout error.
C119 SDR repository corrupt.
C11A SEL corrupt.
C200 The error occurred during
memory configuration
check.
C201 Memory Configuration
change is detected.
C202 The error occurred
during CPU configuration
check.
C203 CPU Configuration
change is detected.
Description
Failure of the SROM for storing
sensor data record information
BMC device (chip) failure
BMC RAM error
BMC error
BMC error
Private I2C bus not responding
BMC error
BMC error
BMC error or SDR data
corruption
BMC error or system event log
data corruption
The memory information could
not be obtained.
The memory configuration has
changed since the previous
startup.
The CPU information could not
be obtained.
The CPU configuration has
changed since the previous
startup.
Troubleshooting 8-19
Recommended Action
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
Upload the RMC
firmware. If this does
not resolve the
problem, contact your
service representative.
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
This message appears
if the configuration was
changed since the
previous startup. If this
message appears even
no configuration
change has been
made, contact your
service representative.
Turn off the power, and
then restart the server.
If this does not resolve
the problem, contact
your service
representative.
This message appears
if the configuration was
changed since the
previous startup. If this
message appears even
no configuration
change has been
made, contact your
service representative.