Table of Contents
Advertisement
IMPORTANT:
Be sure to confirm that the date and time in the BIOS parameters are
correctly specified. In any of the following situations, check the system
time before using the server:
After transporting the server
After removing the server from storage
After setting the server to "Hibernate" under any conditions for
which server operation is not guaranteed (any temperature outside
the range from 10 to 35°C or any humidity outside the range from
20 to 80%)
Check the system time approximately once per month. In addition, if
incorporating the server into a system for which high time precision is
required, it is recommended to ensure the precision by using a time
server (an NTP server) or similar means.
If the system time becomes considerably slow or fast over time even
though you regularly adjust it, contact the dealer where you purchased
the server or the maintenance service company for maintenance.
Configuring Your Server 4-7
Advertisement
Table of Contents
Troubleshooting
