Samsung SCB-1001P User Manual page 25

- MODE : Determines whether to use the ar e a selected.
-
MASK COLOR : Determine area color. You can select GREEN, RED, BLUE, BLACK,
WHITE and GRAY.
- SEL POS/POS : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIV
menu.
 syNC : In ar eas where the supply is at
50Hz(PAL), you can synchronize the
output phase of multiple cameras using
the power synchronization function
(Line-Lock)
without using a synchronization signal generator.
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
Press the Function Setup switch.
 You can select a desired phase from 0 to 359 when select 'phase'.
 When using AC power at 50Hz(PAL) frequency, you can use the L/L type synchronization.
When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.

 ReVeRse : You can reverse the picture.
- OFF : You don't reverse the picture.
- H-REV : You can flip the picture horizontally on the screen.
 shARpNess : As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
 COaX : COAX option is set to "On" will specify the use of coaxial communication.
 SSDR(samsung super dynamic Range)
SSDR illuminates darker areas of an image while
retaining the same light level for brighter areas to
even out the overall brightness of images with
high contrast between bright and dark areas.
1. When the SETUP menu screen is displayed, select 'SSDR' by using the
Function Setup switch so that the arrow indicates 'SSDR'.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
ACY menu settings and return to the SPECIAL
SYNC
▶ PHASE
Press SET to Return
:
SSDR SETUP
▶ LEVEL
Press SET to Return
0
*IIIIIIIIIIIIIIIIIIIII
8
IIIIIIIIII*IIIIIIIIIII
English_25