Samsung SCB-1001P User Manual page 22

Setup
BACKLIGHT
The SCB-1001 is designed to deliver a distinctive subject and background at the
same time, even when the subject is backlight, by adopting
B2 DSP chip.
1. When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
2. Select a desired mode using the Function Setup
switch depending on the camera purpose.
UseR blC : Enables a user to directly

select a desired area from a
picture, and to view the area
more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HlC (High light Compensation) :

This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
- LEVEL : Adjusts the brightness level of a
monitoring area.
- LIMIT : Enable to change the operating condition.
- MASK COLOR :
Off : Not being used

22_ Setup
Change the color of the masking area. (Black, Red, Blue, Gray, Magenta)
a function of the proprietary
MAIN SETUP
1. LENS
2. EXPOSURE
3. DEFOG AUTO
4.
WHITE BAL
5. BACKLIGHT
BLC SETUP
▶ 1.LEVEL MIDDLE
2.TOP IIIIIIIIIIIIIIIIIIIII
3.BOTTOM IIIIIIIIIIIIIIIIIIIII
4.LEFT IIIIIIIIIIIIIIIIIIIII
5. RIGHT IIIIIIIIIIII IIII  IIIII
6. RETURN
HLC SETUP
▶ 1. LEVEL MIDDLE
2. LIMIT NIGHT ONLY
3. MASK COLOR
4. RETURN
DC
ATW
OFF
81
181
211
461
BLACK