Attach Hose; Position Tools - Hoover U5361950 Owner's Manual

1-5
Place nuts in recessed areas on
front of handle. Hold each nut in
place while tightening each bolt
securely with a Phillips screw driver.

Attach hose

1-8
A
B
Align end of hose with projections
(A) over slots (B) in dirt duct.

Position tools

1-11
Place smaller unridged end of wand
into bottom of rack. Snap wand into
clip. Repeat with other wand.
4
1-6
Place bottom of cup into cleaner.
Pivot cup and snap in place.
Note: Hose must be connected as shown for
all operations.
1-9
B
Slide hose into duct (B) and twist
hose to lock it into place.
1-12
C
B
A
Snap ends of dusting brush (A),
crevice tool (B) and furniture nozzle
(C) into clips as shown.
1-7
Position cord on back of cleaner as
shown and press cord into clip.
1-10
D
C
Lift hose tube cover (C).
Position hose over hose hook (D)
and into hose tube (E).
1-13
The crevice wand is packed inside
one of the extension wands. Place it
inside a wand for storage on the
cleaner as well.
E
D