Owner’s Manual ENGLISH pp. 1-13 ESPAÑOL pág 15-22 FRANÇAIS p. 23-30 This product was designed for easy assembly (see page 3) This vacuum cleaner takes HOOVER Type “Z” Allergen ® Filtration filter bags Review this manual before operating the cleaner www.hoover.com...
If you need any assistance: Visit our website at www.hoover.com. Click on the “Service” button to find the service outlet nearest you OR Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.
2. How to use Cleaner description 1. Handle 13. Nozzle control knob: 2. ON/OFF switch slide knob to correct set- 3. Cord hooks: wrap cord ting for height of carpet around hooks for storage. being cleaned Top hook can be rotated 14.
Settings For maximum cleaning perfor- Carpet height Handle position mance, the following carpet height adjustment For ease in sliding knob, the handle settings are recommended: should be in the upright position (C). The cleaning of carpet and rugs • Lowest setting: for all types of The nozzle will not move into the takes place at the nozzle (A).
2-12 2-11 2-10 Attach wand and tools Select proper tool Removing hose D. Dusting brush may be used for Attach tool or wand to the hose (B). When using cleaning tools, cleaner carved furniture, table tops, books, handle should be in the upright Attach tool to wand (C) by pushing lamps, lighting fixtures, venetian position.
So, if you are using the cleaner on genuine HOOVER filter bags made new carpet, be sure to change the by The Hoover Company to assure filter bag often, even if the “Check that your cleaner operates at peak bag” indicator does not show red.
Slide dry filter into slot. Let filter air dry and reposition it on the cleaner. Replace bag door. Should you want to replace this fil- ter, ask for HOOVER part No. Should you want to replace this 40110004. filter, ask for HOOVER part No.
When purchasing a important for the effective operation new belt, ask for HOOVER part No. of the cleaner. The belt is located 38528040 (belt package part No. under the hood of the cleaner and 40201190).
Do not send your cleaner to The tion for the life of the motor. The cool for 30 minutes (this will reset the Hoover Company in North Canton for addition of lubricant could cause thermal protector) service, this will only result in delay.
The Hoover Company on-line at www.hoover.com This warranty does not cover pick up, delivery, or house calls; however, if you mail your appliance to a Hoover Factory Service Center for warranty service, transportation will be paid one way. While this warranty gives you specific...
Need help?
Do you have a question about the U5018 and is the answer not in the manual?
Questions and answers