Select Tool; Attach Hose And Tool; How To Connect - Hoover FloorMate SpinScrub 800 Manual

Select tool
A. Floor swivel tool
* Swivel head
* 2 rows of brushes
o Use to clean small, tight areas
B. Grout tool
* Stiff brushes to use for more, concentrated cleaning
on stubborn grout stains
Attach hose and tool
Unplug cleaner from electrical outlet.
How to connect hose
/Open hose door (A) on side of cleaner.
/ Align hose connector (B) with hose and solution ports (C).
/ Insert hose connector (B) until it snaps in place.
/ To disconnect hose: Squeeze the hook (D) on bottom of hose
connector. Remove hose from port.
/ Close hose door tightly.
k,. A
B /
How to connect telescoping wand
/ Slide wand (A) onto hose end (B). Snap wand over tab
(C) on hose.
/ To extend telescoping wand, pull button
(D) toward
you and pull wand away from you to the desired length. The full
extension of the wand is indicated by a 'MAX' line. It is recom-
mended you do not extend the wand past this line.
/ To remove wand: Push forward and up on latch (E).
Slide wand off hose.
D
How to connect tools
/ Tools may be attached directly to the hose or onto the
telescoping wand.
/ All tools attach in the same manner.
/ Slide tool onto hose or wand. Snap tool over tab (A)
on hose or wand.
/ To remove tool: Push fo_aNard and up on latch (B).
Slide tool off hose or wand.
I4