Using The Card Reader - Getac Notebook computer User Manual

Using the Card Reader

NOTE:
To use the Card Reader, the Card Reader driver supplied with your computer must
be installed.
If your hard disk is divided into several drives, make sure that all drives have been
formatted before using the Card Reader. Otherwise, you may encounter problems
when using the Card Reader.
You can use only storage cards. Your Card Reader does not support cards with I/O
(input/output) functions such as a wireless network card or Bluetooth wireless card.
Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports the MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS), and Memory Stick PRO (MS PRO)
cards.
Shown next are the appearance and size of each card type for your
reference.
Type
Appearance
Size
To insert a storage card:
1. Locate the Card Reader slot on the left side of the computer.
Expanding Your Computer
MMC Card SD Card
× × ×
24 32 1.4 24
(mm) (mm)
MS / MS PRO Card
× ×
32 2.1 21.5
(mm)
×
50 2.8
4-13