Fill The Solution Tank; Extractor Basics; Filling The Tank - Hoover SteamVac Steam Vac Duo Deep Cleaner Owner's Manual

Extractor Basics

Fill the solution tank

Unplug extractor from electrical
outlet.
Pull up on solution tank handle (A) and
remove solution tank (Fig. 4)
Turn tank upside down and unscrew cap
(B) (Fig. 5). The cap consists of 2 pieces --
the cap ring (C) and the solution tank
valve (D).
Pour detergent into tank to detergent fill
line (E) (Fig. 6).
Fill tank completely with hot tap water.
NOTE: For best results, use only Hoover detergents.
They are specifically formulated for use with your
SteamVac™ Duo™ cleaner.
Replace cap. Be sure the valve (D) is in the cap ring (C)
before screwing the cap back on the tank (Fig. 5).
Place tank back onto extractor (Fig. 7), pressing firmly to be
sure tank is fully positioned.
Caution:
Detergents contain Anionic and Nonionic
Surfactants. Avoid contact with the eyes and skin. In case
of contact with eyes, flush with cold water for 15 minutes.
In case of contact with skin, wash with water. If irritation
persists, call a physician. For Medical Information (U.S.),
call 1-800-752-7869.
4
B
5
C
D
6
7
Continued
A
E
5