Method 5 - Kodak Scan Station 700 Administrator's Manual

Method 5

A-61796 December 2013
This method requires an update package and a configuration file to be
copied to a USB drive. When the USB drive is inserted into the Scan
Station and recognized, if the update package is a different version than
the currently installed version, you will be prompted to update the Scan
Station firmware. Both the old version number and the version number
of the update package will be displayed. If you decide to update the
firmware, all the data found in the update package will be copied to the
Scan Station and installed. When the installation is complete, click OK
or remove the USB drive and the Scan Station will automatically be
restarted.
When the Scan Station detects the configuration file (kss.xml) the
message, Do you want to be prompted to update the device
configuration? will be displayed. Select Yes and follow the prompts on
the Scan Station if an update package (KSSUpdate.exe) is also on the
USB drive and you want the Scan Station firmware updated.
NOTE: You can obtain update packages from your Service
Representative. Update packages will always be a
KSSUpdate.exe file.
To configure your USB drive for firmware updates:
1. Select the Configuration tab.
2. Select a configuration file to write to the USB drive.
3. Select File>Export to write the configuration file to a USB drive.
The Save As screen will be displayed.
4. Save the file on the USB drive with the name KSS.xml and click
Save.
5. Copy KSSUpdate.exe to the USB drive.
9-17