Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 600 and is the answer not in the manual?

Questions and answers

Norman L. Braun Braun
February 6, 2025

Bulb is working but light does not get through to the screen

1 comments:
Mr. Anderson
February 10, 2025

The Kodak 600 bulb may be working but not projecting light onto the screen due to several possible issues:

1. Incorrect Bulb Installation – The bulb might not be seated properly in the socket, preventing it from directing light correctly.
2. Dirty or Misaligned Lenses – Dust, fingerprints, or misalignment of the projection or condenser lenses can reduce brightness or clarity. Cleaning and ensuring proper alignment may help.
3. Faulty Mirror or Heat-Absorbing Glass – If the mirror or heat-absorbing glass is dirty or improperly positioned, it could block or distort the light path.
4. Projection Distance Issue – The projector may be placed too far or too close to the screen, affecting the visibility of the projected image.
5. Lamp Door Not Properly Closed – If the lamp door is not securely fastened, the projector may not function correctly.

Checking and addressing these factors should help restore proper projection.

This answer is automatically generated

Norman L. Braun Braun
February 6, 2025

Light not going to the lens

This manual is also suitable for:

600h650650h750750h800 ... Show all

Table of Contents

Save PDF