Maintenance Cleaning The Nozzle - Hoover FloorMate SpinScrub 800 Owner's Manual

Maintenance
Cleaning the nozzle
Turn cleaner OFF and disconnect from electrical outlet.
The cleaner's nozzle can be removed for easy cleaning.
Slide the two nozzle release latches (A) outward.
43
Remove nozzle (B) by pulling straight out.
44
Rinse nozzle under running water. Remove debris from
45
squeegee (C) and wipe with a damp cloth.
To replace nozzle, make sure latches (D) are out.
46
Cleaner should be in the upright position for easier assem-
bly of the nozzle.
Align middle section (E) of nozzle with opening (F) on cleaner.
While holding nozzle in place, slide latches inward to lock
47
in place.
16
43
A
44
B
45
46
F
E
D
47
A
C
D