Cleaner Maintenance; Nozzle Maintenance - Hoover H-Free 500 Hydro Plus User Manual

Integrated Furniture Tool - Ideal for cleaning surfaces like sofa.
Mini power nozzle* - Ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. The working angle can be
adjusted when move backwards and forwards.
NOTE: After use, rotate the agitator release flap anti-clockwise with a coin to take out the agitator, and remove any hair /
threads collected on the brush. [21]
Long Crevice Tool* - Ideal for tight and difficult areas.
All the accessories except dust bin cleaning tool can be fitted on the main product and on the tube. [7]
Dust Bin Cleaning Tool*- Ideal to remove the dust, debris and hairs inside of dust bin. [12]
Accessory Bag*
Accessories can be stored in the accessory bag.
Wall Mount*
If required, fix the wall mount to the wall, using the two screws and plugs provided. [2]

CLEANER MAINTENANCE

Emptying the Dust Cup
1. Press the main body release button and remove the tube. [8]
2. Press the dust cup empty button to release the bin flap and empty the contents. [12a]
3. Close the dust cup flap, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Quick Daily Cleaning of Dust Cup
Just open the dust bin flap and remove the dust with the help of the dust bin cleaning tool.
1. Use the hook end to pull out the dust collected inside the dust bin. [12b]
2. Use the brush end to clean the fine dust stuck around the metal mesh filter. [12c]
Cleaning the Dust Cup and Filter
Pre-filter maintenance reminder. If the pre-filter needs maintenance, the LED light on the cleaner starts to blink in red colour.
1. Press the handheld release button and remove the handheld unit from the tube. [8]
2. Press the battery release button and remove the battery. [11]
3. Remove the dust bin assembly by turning it clockwise and pulling away from the unit. [13]
4. Remove the Pre-Motor filter pulling the support from the bin assembly. [14a]
5. Remove the single cyclone system pulling the metal ring from the bin assembly.
6. Remove vortex finder by rotating clockwise and pull from the cyclone system. [14b]
7. Wash the filter and single cyclone system in lukewarm water and leave to dry for 24 hours. [15,16]
8. Reassemble once completely dry and refit to the product.
NOTE: Do not use hot water or detergents when cleaning the pre-motor filter. In the unlikely event of the pre-motor filter
becoming damaged, fit a genuine Hoover replacement. Please ensure you refit the pre-motor filter before assembling dust
bin to cleaner main body as filter protection mechanism will be activated.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter should be washed
at least once a month.

NOZZLE MAINTENANCE

Cleaning the 360° Hydro roller, Hybrid Care roller, rear wiper blade and front wiper blade
IMPORTANT: Always switch off the cleaner before cleaning the 360° Hydro roller, Hybrid Care roller, rear wiper blade
and front wiper blade.
Cleaning the 360° Hydro roller:
1. Remove the nozzle from the tube. [18]
2. Detach the 360° Hydro roller release flap. It is positioned on the lateral side of the nozzle. [4a]
3. Remove the sealing cap and ensure the water tank is empty. [4b, 4c]
4. Wash the 360° Hydro roller and the sealing cap in lukewarm water with a gentle detergent by squeezing it or wash it
in washing machine using gentle cycle without the 360° Hydro roller release flap. [4d]
5. Leave it to dry in upright position for at least 24 hours. [4e]
6. Re-fit 360° Hydro roller on the nozzle to its starting position.
7. Close the 360° Hydro roller release flap to the nozzle.
* Certain Models Only
6
GB