Installation
Lens Shift Adjustment
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen.(See page 27)
The display position can be
shifted upward up to 50%
elevation of the display.
When the lens is shifted to top .
The display position can be
shifted to the left in up to
10% width of the display.
When the lens is shifted to leftmost .
Picture Level and Pitch Adjustment
Picture tilt and projection angle can be adjusted with
handles on both sides of a projector. Projection angle
can be adjusted to 5.7 degrees upward.
1
Press the knob on the handle. The handle pops
out.
2
Turn handles (right and left) until picture is
projected on proper position. Rotate rear
adjustable feet to stabilize the projector on a
table.
3
Press the knob and retract the handle.
1
The display position can be
shifted downward up to 50%
low level of the display.
When the lens is shifted to bottom .
The display position can be
shifted to the right in up to
10% width of the display.
When the lens is shifted to rightmost .
LEVEL AND PITCH
ADJUST HANDLE
ADJUSTABLE
FEET
Height of front feet can be adjusted
by turning handles.
REAR ADJUSTABLE
FEET. (Refer to p.10).