Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally .
Indicators
LAMP
READY
red
green
• • • on
• • • dim
• • • off
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange.
✽
When this lights orange, replace the projection lamp a new one promptly. Reset the lamp
counter after replacing the lamp (
6
WARNING
LAMP
TEMP .
REPLACE
red
orange
The projector is off. (The main switch is OFF position or the AC power
cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to
✽
turn on the projector.
✽
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is
✽
being cooled down. The projector cannot be turned on until cooling is
completed and the READY indicator lights green.
✽
The projector is in the Power management mode.
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
p.57)
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)