Basic Operation; Adjusting Screen; Zoom Adjustment; Focus Adjustment - Christie 38-VIV212-01 User Manual

BASIC OPERATION

1 Press ZOOM button on Top Control. Message "Zoom" is
displayed.
2 Press POINT UP button to make image larger, and press
POINT DOWN button to make image smaller.
1 Press FOCUS button on Top Control. Message "Focus" is
displayed.
2 Adjust focus of image by pressing POINT UP/DOWN button(s) .
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.
1 Press LENS SHIFT button on Top Control. Message "Lens shift"
is displayed.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1 Select Keystone on SETTING menu. (Refer to page 35.)
Keystone dialog box appears.
2 Correct keystone
UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to
reduce the upper part of the image, and press POINT DOWN
button to reduce the lower part. Press POINT LEFT button to
reduce the left part, and press POINT RIGHT button to reduce
the right part.
Reduce the upper width
with POINT UP button.
18

ADJUSTING SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

distortion by pressing
Reduce the lower width
with POINT DOWN button.
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Lens shift
POINT
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
Reduce the left part with
POINT LEFT button.
Zoom
Focus
Reduce the right part with
POINT RIGHT button.