Sleep Mode; Returning To Standby Mode - Oki C301 User Manual

Power Save button on the control panel. The Power Save button illuminates while in
Power Save Mode.
NOTE
By default, the time interval to enter power saving mode is set to 30 minutes.
You can change the time interval by pressing the Setting button on the
control panel. Then select Sys Config Menu > Power Save Time.
S
LEEP MODE
Your machine transitions from power saving mode to sleep mode after a set period of time.
In sleep mode the power consumption of the device is minimal. The Power Save button
blinks while in sleep mode.
NOTE
> The machine will not enter sleep mode if an error occurs and the machine
requires attention.
> By default, the time interval to enter sleep mode is set to 10 minutes. You
can change the time interval by pressing the Setting button on the
control panel. Then select Sys Config Menu > Sleep Time.
R
ETURNING TO STANDBY MODE
To return the machine to standby mode from power save or sleep mode, press the Power
Save button on the control panel.
NOTE
When your machine receives a print job, it automatically returns to standby
mode.
Getting Started > 12