Cancel Button - Oki OKIPAGE 6w Maintenance Manual

<RAM Check> button
Sends a RAM Check command to check the free space of the memory which is used for raster
and receiving buffer including optional RAM.
This application, after sending a RAM Check command, will wait for the RAM check end response
from the printer with the dialog box opened.
In the case of "Cancel" button being selected during RAM check or the occurrence of an I/F error
and so on, for the purpose of releasing the RAM check mode, it will forcefully terminate this mode
after resetting the printer by sending I-Prime signal.
The following messages will appear when RAM Check is selected.
2.3 Reload button
Reloads the menu setting or count values for this printer.

2.4 Cancel button

Clears the settings which have not been reflected (not been designated by "Enter") among GUI
setting values in engine menu group.
When a connected printer does not support some menu items, they are displayed in faint color
(gray), incapable of being selected without setting values shown.
Whether the functions are supported or not shall be decided depending on whether response
signals are returned or not to all the commands for loading menu settings of all items
And when the control is set disabled by the initial file, any selection cannot be made, but currently
set values will be displayed.
2.5 Entry button
Reflects GUI set values in engine menu group to the printer.
When selecting "Enter" button, GUI displayed information (user settings) will be read to send all
the menu item set commands, independent of whether it will be changed or unchanged.
And soon after sending the menu set commands, a menu setting read command will be sent. If
the response to it differs from the designated menu setting, the menu box will appear each item
to notify the EEPROM write error to user.
C - 6