Top Cover Assy And Flat Cable Assy - Oki OKIPAGE 6w Maintenance Manual

3.3.7

Top Cover Assy and Flat Cable Assy

(1) Dismount the upper cover assy. (See Section 3.3.5.)
(2) Dismount the LED head. (See Section 3.3.2.)
(3) Press the left clamp outward and dismount the engagement and top cover assy 1. (Tension
spring 2 also comes off at the same time.)
(4) Disconnect connector HEAD1on the control board and dismount flat cable assy 3.
2
1
connector (HEAD1)
Note: When reassembling these parts, make sure that
3 - 12
OKIPAGE 6w Mask ROM type
3
OKIPAGE 6w
the flat cable assy is firmly fitted with both the
LED Head and connector Head 1 and Head 2.
An improper fit may damage the control board
and LED head.
3
3