Samsung SCD-3083 User Manual page 30

Setup
AREA FENCE
- SEL POS : Selects a position from
- X POS / Y POS : Adjust the size
and position of the selected area
fence.
- DIRECTION
IN : Detects objects entering the
fenced area.
OUT : Detects objects exiting the fenced area
IN/OUT : Detects all objects entering and exiting the fenced area.
- RETURN : Return to the TRACKING menu.
- RETURN: Return to the INTELLIGENCE menu.
• FIXED/MOVED : Detects an object that emerges or disappears from the
M

A detection (FIXED/MOVED) error may occur if :
-
multiple motions occur continuously in random directions
-
a fixed object moves in one position continuously
-
a second object screens the first moving object
- DETECT BOX : Outlines an object on the screen in a box when its movement
matches a custom Motion Type.
- ALARM OUT : Releases a signal from the MD Output Port on the back of the
camera when an object's movement matches a custom Motion Type.
- DETECT AREA : Motion Detection and
tracking will only occur within this defined
area. (Full Screen is defined as factory
default).
- MASK AREA : Specify a detection
exception area to mask.Select a mask area
number and specify the size and position.
• AREA : You can select up to 4 areas.
• MODE : Determines whether to use
the area selected in the
AREA.
• TOP / BOTTOM / LEFT / RIGHT :
Adjust the size and position of the
selected area.
30_ Setup
POS1 ~ POS4.
screen, or stays onscreen without movement.
AREA FENCE
1. SEL POS
2. X POS
IIIII  IIIIIIIIIIIIIIII
3. Y POS
 IIIIIIIIIIIIIIIIIIIIIIIII
4. DIRECTION
5. RETURN
DETECT AREA
1.TOP
IIIIIIIIIIIIIIIIIIIII
2.BOTTOM
IIIIIIIIIIIIIIIIIIIII
3.LEFT
IIIIIIIIIIIIIIIIIIIII
4.RIGHT
IIIIIIIIIIIIIIIIIIIII
5.RETURN
MASK AREA
1.AREA AREA1
2.MODE
3.TOP
IIIII IIIIIIIIIIIIIIII
4.BOTTOM
IIIIIIIIIIII IIIIIIIII
5.LEFT
IIIIIIIIIIIIIIIIIIIII
6.RIGHT
IIIIIIIIIIII IIIIIIIII
7.RETURN
POS1
12
1
IN
1
50
1
50
OFF
30
110
25
110