Table of Contents
Advertisement
BACKLIGHT
The camea is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, by adopting a function of the
proprietary SV-V DSP chip.
1.
When the SETUP menu screen is displayed, select 'BACKLIGHT' by using
the Function Setup button. so that the arrow indicates 'BACKLIGHT'.
2.
Select a desired mode using the Function Setup button depending on the
camera purpose.
OFF : Not being used
USER BLC :
Enables a user to select a desired
area on a picture and view that area more clearly.
-
LEVEL : Adjusts the brightness level of a
monitoring area.
-
TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize
white out due to over exposure and preserve much
of the on-screen details when the camera aims a
strong light source.
-
LEVEL : Adjusts the brightness level of a
monitoring area.
-
LIMIT : Enable to change the operating condition.
-
MASK COLOR/TONE : Change the
color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
-
TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
WDR : When there are both bright and dark areas at the same time, this mode makes
both areas distinctive.
-
LIMIT : Adjust the WDR Sensitivity by
selecting LOW, MIDDLE, or HIGH.
-
LEVEL : Adjust the WDR Brightness by
controlling the bar from 1 to 10.
-
MODE : Indoor and outdoor backlight
conditions are appropriately selected.
-
ANTI ROLLING : Rolling caused around a
fluorescent lamp is improved.
BLC SETUP
1. LEVEL
MIDDLE
2. TOP
3. BOTTOM
4. LEFT
5. RIGHT
140
6. RETURN
HLC SETUP
1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR
BLACK
4. MASK TONE
5. TOP
6. BOTTOM
7. LEFT
8. RIGHT
9. RETURN
WDR SETUP
1. LIMIT
MIDDLE
2. LEVEL
3. MODE
INDOOR
4. ANTI ROLLING
OFF
5. RETURN
English_23
30
100
75
5
10
120
10
210
5
Advertisement
Table of Contents
