Table of Contents
Advertisement
Connection
CONNECTING TO MONITOR
Connect the Video OUT port on the rear panel of the camera to a monitor.
As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
Only connect the cable when the power is turned off.
CONNECTING TO POWER
Since power specifications differ depending on the model, make sure to check your model name
and specifications before connecting power.
You can connect power as shown in the following figure.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG)
Resistance ( Ω /m)
Voltage Drop (V/m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively
long adaptor output line for connection to the camera may affect the performance of the camera.
Standard voltage for camera operation ：
*
*
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Camera
----
Power Input Terminal
DC 12V ±10%, AC 24V ±10%
Monitor
English_15
Advertisement
Table of Contents
