Samsung SCD-3083 User Manual page 25

DAY/ NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up
and Down buttons so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
 AUTO : The mode is switched to 'Color' in a normal environment, but switches to
'B/W' mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.
- BURST MODE :
burst signal on B/W mode.
- DURATION : You can select the brightness
level at which the camera switches from day
to night mode.
- DWELL TIME :
time about changing the day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
EXTERN : Ground to the grounding terminal to allow automatic switching between
COLOR and B/W.
 COlOR : The picture is always displayed in color.
 b/W : The picture is always displayed in black and white. You can turn on or off the
burst mode on B/W mode.

When AGC in the EXPOSURE menu is set to OFF, AUTO mode is not available to select.

When using an external input, Connect the D & N Input Port to the Ground Terminal.
You can turn on or off the
You can select the duration
AUTO SETUP
▶1.BURST MODE
2.COLORB/W
DURATION
DWELL TIME
3.B/WCOLOR
DURATION
DWELL TIME
4.RETURN
English_25
ON
FAST
5 SEC
FAST
10 SEC