Samsung SCD-3083 Quick Manual

ENGLISH
Super High Resolution WDR
Dome Camera
Quick Manual
SCD-3083
Dome Cover
2.8 Vari-focal Lens Module
Function Setup Switch
and right amend or confi rm changes.
right(FAR)
Short to press this button to fit the focus automatically.
Video Output Terminal to Monitor
Rotate Base : control rotating angle of camera.
Power Input Connector
D & N Input Terminal :
MD Output Terminal: Motion detection signals are output through this terminal.
Video Output Jack
SSDR
6.SSNR3
DEUTSCH
Domekuppel
Supporto Pan : Für die Steuerung des Schwenkwinkels der Kamera.
x Objektiv mit variabler Brennweite :
2.8
Funktion-Setup-Schalter : Anzeigen des Bildschirmmenüs und Bewegen des Cursors in vier
Richtungen zur Statusbestä oder nach Änderung eines Elements.
Videoausgang für Anschluss von Monitor
Drehbasis : Für die Steuerung des Drehwinkels der Kamera
Netzeingang : Schließen Sie die für das jeweilige Modell angegebene Stromversorgung hier an.
Erdungsanschluss
D & N Eingang Anschlussterminal : Sie können zwischen Tag- und Nachtmodi umschalten, indem Sie ein externes
Signal an diesen Anschlussterminal anschließen.
MD Output Anschlussterminal : Bewegungserkennungssignale werden durch diesen Anschluss ausgegeben.
Video-Out-Anschlussbuchse
SALES NETWORK
3.SSDR
•
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL: +82-70-7147-8740~60, FAX: +82-31-8018-3745
• SAMSUNG TECHWIN AMERICA Inc. • SAMSUNG TECHWIN EUROPE LTD.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park
6.SSNR3
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS
Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
www.samsungcctvusa.com
www.samsungtechwin.com PT01-002076A
www.samsungsecurity.com
Safety Information
SCD-3083 Quick Manual
: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)
CAUTION
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit.
This exclamation point symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING
Shield Case Pan Base : control panning angle of camera
3 ~ 8.5 mm (F1.2)
• To prevent damage which may result in fire or electric shock hazard, do not expose this
: i D p s a l t y e h O S D m e u n a d n m v o t e e h u c s r r o p u d , o w n e l , , t f appliance to rain or moisture.
When menu is off, move this switch left(NEAR) or
for adjusting focus. move this switch up(TELE) or down(WIDE) for adjusting zoom.
• To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
WARNING
Ground Terminal
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Y u o c n a s w t i h c o t D y a & N g i t h M o e d y b c n o e n i t c g n n a x e r e t a n i s l n g l a
Using any other adapter could cause fire, electrical shock, or damage to the product.
to this terminal.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may
cause abnormal heat generation or fire.
BRIGHTNESS / SHUTTER / AGC / SENS-UP / RETURN
4. Securely plug the power cord into the power receptacle. insecure connection may
OFF
OFF / ON cause fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
/ WDR personal injury.
ON
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or
AUTO / EXTERN / COLOR / B/W
containers filled with water on top of the camera. doing so may cause personal injury
due to fire, electric shock, or falling objects.
IMAGE ADJ / CAM TITLE / SYNC / INTELLIGENCE / PRIVACY
/ DIS / PROFILE / COAX / RETURN
ESPAÑOL
SCD-3083 Kurzanleitung SCD-3083 Manual Rápido
Cubierta del Domo Tapa Protectora
Abschirmkappe
Base de Paneo : Controla el ángulo de paneo de la cámara.
3 ~ 8.5 mm (F1.2) Módulo del Lente Varifocal
Botón de Configuración de Funciones : Muestra el menú en la pantalla y desplaza el cursor en las
cuatro direcciones para confirma estado o el cambio de un elemento seleccionado.
Terminal de Salida de Video al Monitor
Base de rotación : Commande de l'angle de rotation de la caméra.
Terminal de entrada de alimentación : Conecte aquí la alimentación apropiada para cada modelo.
Terminal de toma de tierra
Terminal de entrada D y N : Puede cambiar al modo Día y Noche conectando una señal externa a este terminal.
Terminal de salida MD : La salida de las señales de detección de movimiento se realizan a través
de este terminal.
Puerto de Salida de Video
HELLIGKEIT / SHUTTER / AGC / SENS-UP / ZURÜCK
AUS
AUS / EIN
AUS / BEN BLC / HLC / WDR
BILDEINST / TITEL KAM / SYNC / INTELLIGENCE / PRIVAT
COAX / ZURÜCK
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or
electric shock.
CAUTION
8. If any unusual smells or smoke come from the unit, stop using the product. in such
RISK OF ELECTRIC SHOCK.
case, immediately disconnect the power source and contact the service center.
DO NOT OPEN
continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems
caused by unauthorized modifications or attempted repair.)
10. W h e n l c a e n n i , g d o n t o s r p y a w t a r e d r i
cause fire or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a
location subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature, low temperature, or high
humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and
then move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to
do so may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this
may damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any
time.
10. D o n t o x e p o e s h t e a c m e a r o t a r d o i a t c
CCD.
FRANÇAIS
SCD-3083 manuel de référence rapide
Couvercle du dôme Boîtier de protection
Base panoramique : Commande de l'angle panoramique de la caméra.
Module de lentille avec zoom x 2.8 3 ~ : 8.5
x 2.8 3 ~ : 8.5 mm (F1.2)
Commutateur de configuration des fonctions : Affiche le menu sur l'écran et déplace le curseur
dans les quatre directions, pour confirmer, ou après une modification d'un élément sélectionné.
Terminal de sortie vidéo vers le moniteur
Base de rotation : Permet de commander l'angle de rotation de la caméra.
Terminal d'entrée d'alimentation : Raccordez l'alimentation selon la manière spécifiée ici pour
chaque modèle.
Borne de mise à la terre
Borne d'entrée D & N : Vous pouvez basculer enter le mode Jour et Nuit en connectant un signal externe à cette borne.
Borne de sortie MD : Les signaux de détection de mouvement sont émis via cette borne.
Prise de sortie vidéo
BRILLO / SHUTTER / AGC / SENS-UP / VOLVER
3.SSDR
OFF / ON
OFF / USER BLC / HLC / WDR
6.SSNR3
AJUST IMAG / TITULO CAM / SYNC / INTELIG. /
PRIVACIDAD / DIS / PERFIL / COAX / VOLVER
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
c e y l t o n o t p r a s t f o h t e p o r d u c . t d o n i g o s m y a
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. P o r e t t c h t e p o w r e c o d r f o r m b e n i g w l a e k d o n r o p n i
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. U e s o n y l w h t i a c t r s , a t n , d r t p i o , d r b c a e k , t r o a t b e l s
manufacturer, or sold with the apparatus.
13. U n p u l g h t s i a p p r a t a s u w h e n a a c d r s i u e s . d U e s a c
moving the cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
i v i . y t R a d o i c a v i t y t i x e p o u s e r m y a d a m a g e h t e
Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus
ITALIANO
SCD-3083 Guida rapida
Custodia a cupola Custodia di protezione
Supporto Pan : Controllo angolo di rotazione orizzontale (pan) della videocamera.
mm (F1.2) Sistema varifocale x 2.8 3 ~ : 8.5 mm (F1.2)
Pulsante Impostazione funzioni : Visualizza il menù e permette di scorrere il cursore in quattro
direzioni per confermare o modi la voce selezionata.
Terminale uscita video al Monitor
Supporto girevole : Controllo angolo di rotazione della videocamera.
Terminale alimentazione : Collegare l'alimentazione secondo le indicazioni del modello utilizzato.
Terminale di massa
Terminale di ingresso D & N : È possibile passare al modo Day & Night (Giorno e notte) collegando un segnale
esterno a questo terminale.
Terminale di uscita MD : I segnali di rilevazione movimento vengono trasmessi tramite questo terminale.
Jack Video in uscita
LUMINOSITÀ / OTTURATORE / AGC / SENS-UP / RITORNO
LUMINOSITE / OBTURATEUR / AGC / SENS-UP / RETOUR
3.SSDR
ARRET / MARCHE OFF / ON
ATW / EXTER / INTER /MANUEL/ AWC SET ATW / ESTERNO / INTERNO /MANUALE/ AWC SET
OFF / USER BLC / HLC / WDR
ARRET / USER BLC / HLC / WDR
6.SSNR3
AUTO / EXTERNE / COULEUR / N/B AUTO / ESTERNO / COLORE / B/N
REG IMAGES / TITRE CAM / SYNC / INTELLIG. / REG IMMAGINE / TITOLO CAM / SYNC / INTELL. / PRIVACY
MASQUAGE / DIS / PROFIL / COAX / RETOUR / DIS / PROFILO
SAVE / NOT SAVE / REINIT
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco
mark represents Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract.
This product and its electronic accessories should not be mixed with other commercial
c h e d p r a c i t u a l y l r t a p u l g , s wastes for disposal.
Correct disposal of batteries in this product
p e i c e i f d y b h t e (Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
u o i t n w h e n
end of their working life. Where marked, the chemical symbols Hg, Cd or
Pb indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly disposed
of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries
from other types of waste and recycle them through your local, free battery return
system.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions :
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
ČESKY
SCD-3083 Rychly návod
Kryt kopule Kryt
Základna otočení : Kontroluje úhel otočení kamery.
x 2.8 varifokální čočka : 3 ~ 8.5 mm (F1.2)
Tlačítko nastavení funkce : Na obrazovce zobrazí nabídku a přesune kurzor do čtyř směrů k potvrzení
či po změně vybrané položky.
Výstup obrazu do monitoru
Základna rotace : Kontroluje rotační úhel kamery.
Terminál vstupu napájení : Připojte napájení, jak je to uvedeno pro každý model.
Uzemňovací svorka
Konektor vstupu denního a nočního režimu : Můžete přepnout mezi režimy Day (Den) a Night (Noc)
připojením externího signálu k tomuto konektoru.
Konektor výstupu detekce pohybu : Signály detekce pohybu vystupují z tohoto konektoru.
Připojení vystupu obrazu
JAS / CLONA / AGC / SENS-UP / RETURN
VYP
3.SSDR
VYP / ZAP
ATW / VENKU / UVNITŘ / RUČNÍ / AWC SET
VYP / USER BLC / HLC / WDR
6.SSNR3
AUTO / VENKOVNÍ / BARVA / ČB
ÚPRAVA SNÍMKU / NÁZEV KAMERY / SYNC / INFORMACE /
/ COAX / RITORNO
COAX / RETURN
ULOŽIT / NEUKLÁDAT / RESETOVAT