Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCD-2082 SERIES • NTSC MODEL SCD-2082N • PAL MODEL SCD-2082P • POWER SOURCE SCD-2082N / SCD-2082P : DC12V, AC 24V...
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 5
If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
Page 6
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
Page 7
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
Contents INTRODUCTION Features What’s included Component names and Functions INSTALLATION Before Installation Installation Adjust the panning and tilting rotating while watching the monitor CONNECTION Connecting to Monitor Connecting to Power Using coaxial communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi...
Page 9
The camera is able to recognize the concerntration of fog in the image, and automatically defog, correct image of the bad weather such as fog, rain, mist, fumes, etc to make it clear. ssdR (samsung super dynamic Range) For images with high contrast between bright and dark areas from difficult lighting conditions such as backlighting, this camera selectively illuminates darker areas while retaining the same light level for brighter areas to even out the overall brightness.
Page 10
Introduction WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution Varifocal Dome Camera Qui c k Manual SCD-2082 User Manual Tapping Screw 3EA SCD-2082 Installation Video Output Cable * The illustration above may not be exactly same as the real parts, for reference only.
COMPONENT NAMES AND FUNCTIONS ❿ ❶ ❶ Pan Base : Control panning angle of camera. ❷ Rotate Base : Control rotating angle of camera. Tilt Base : Control tilting angle of camera. ❸ ➍ x3.6 Vari-focal Lens Module : 2.8 ~ 10.0mm (F1.2). ➎...
Installation BEFORE INSTALLATION Before installing your camera, you have to read the following cautions : • You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. • Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
Page 13
Original position of T he installation should be done by qualified the cable service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may Hole fall off. Reinforce the ceiling as needed. Cover To change the position of the cable, take away the Hole Cover and pass the cable through. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it anti-clockwise.
Page 14
Installation Adjust the panning and tilting, rotating while watching the monitior Rotate Base Tilt Base Pan Base 1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. • Pan Base moves by 176° to each side direction and 352° on the whole. • Tilt Base covers 73˚ angle. • Rotate Base moves by 174° to each side direction and 348° on the whole. 2) Methods of adjustment •...
Only connect the cable when the power is turned off. CONNeCTING TO pOWeR Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SCD-2082 is DC12V/500mA or AC 24V/300mA. ----...
Page 16
Connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) Resistance ( Ω /m) Voltage Drop (V/m) As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
Page 17
ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN : BNC • • ---- : RS-485 -Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
Setup meNU CONfIGURATION mAIN seTUp leNs BRIGHTNESS SHUTTER expOsURe RETURN SENS-UP defOG AUTO MANUAL OUTDOOR INDOOR WhITe bAl MANUAL AWC→SET bACKlIGhT A U SER BLC SSNR3 dAy/NIGhT AUTO COLOR CAM TITLE PRIVACY IMAGE ADJ COAX MOTION DET SYNC speCIAl SSDR RETURN exIT SAVE...
Page 19
1. Press the Function Setup switch. Main setup menu is displayed on the monitor screen. MAIN SETUP Change the status Select the function LENS ▶ using the Function using the Function EXPOSURE Setup switch up/ Setup switch DEFOG left/right. down.
Page 20
Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 1.BRIGHTNESS IIIIIIIII IIIIIIII BRIGHTNESS : Adjusts the video brightness. 2.SHUTTER ...
Page 21
Defogging and SSDR function cannot be run simultaneously. When defogging function is set to AUTO or MANUAL mode, SSDR function is not available. When SSDR functions is turned on, defogging would become inactive WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. When the SETUP menu screen is displayed, select ‘White Bal’...
Page 22
Setup BACKLIGHT The SCD-2082 is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by adopting a function of the proprietary W6 DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates BACKLIGHT .
Page 23
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. 4. Then you can adjust the noise reduction level. You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'. When adjusting the noise reduction level of the SSNR3 mode, remember that the higher ...
Page 24
Setup IMAGE ADJ IMAGE SETUP 1) When the SPECIAL menu screen is displayed, ▶ 1.MONITOR select ‘IMAGE ADJ’ by using the Function Setup 2.REVERSE switch so that the arrow indicates ’IMAGE ADJ‘. SHARPNESS 2) Select a desired mode using the Function Setup LANGUAGE ENGLISH switch.
Page 25
CAm TITle : If you enter a title, the title will appear on the monitor. 1 If the SPECIAL menu scr een is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. CAMERA TITLE SETUP Set it to ‘ON’...
Page 26
Setup MOTION DET : This product has a feature that allows you to observe movement of objects 1.AREA AREA1 in 4 different areas on the screen, 2.MODE and the words 'MOTION DETECTED' 3.TOP IIIIIIIIIIIIIIIIIIIII appear on the screen when movement 4.BOTTOM IIIIII IIIIIIIIIIIIIII...
Page 27
SSDR(samsung super dynamic Range) SSDR illuminates darker areas of an image while SSDR SETUP retaining the same light level for brighter areas to ▶ LEVEL IIIIIIIIII*IIIIIIIIIII even out the overall brightness of images with Press SET to Return high contrast between bright and dark areas.
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM Check that the power cord and line connection between the Nothing appears on the screen.
Specifications SPECIFICATIONS Video 1/3’’ Super HAD CCD II Imaging Device Imaging Device Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Internal / Line Lock Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Horizontal Resolution...
Specifications OFF / USER BLC / HLC Backlight Compensation Contrast Enhancement SSDR ( Off/On ) Digital Noise Reduction 3D DNR ( Off/On ) Defog Off / Auto / Manual Motion Detection Off / On Off / On (8 programmable zones) Privacy Masking Off / Low / Middle / High Gain Control...