Table of Contents
Advertisement
Setup
SIMPLE FOCUS : Select this
-
-
AFTER D/N :
-
RETURN : Select this to save the changes in the FOCUS ADJ menu and return to
the DC LENS menu.
RETURN : Select this to save the changes in the DC LENS menu and return to the
SETUP menu.
EXPOSURE
1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2.
Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER :
You can select the shutter.
-
ESC : Select this to control the shutter
speed automatically. If ESC is selected,
the shutter speed is automatically
controlled depending on the ambient illumination of the subject.Shutter speed
will change between MIN and MAX by setting.
MIN : 1/50~1/60000
MAX : 1/00~1/20000
-
MANUAL : You can control shutter speed manually.
(NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/120,000sec)
-
A.FLK : Select this when you experience picture flicker, this happen when there is
a clash with the installed lighting frequency.
-
--- :
Shutter speed is fixed.
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing
the installation position.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Set the shutter mode to --- if color rolling occurs.
20_ Setup
to fit the focus automatically.
After D or N is switched, select whether to use the focus
readjustment function.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
ESC
3.AGC
HIGH
4.SENS-UP
OFF
5.RETURN
25
Advertisement
Table of Contents
