Table of Contents
Advertisement
AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but
-
HIGH : Allows automatic gain control from 5.3dB to 42dB.
-
OFF : Deactivates the AGC function.
-
LOW : Allows automatic gain control from 5.3dB to 32dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level and
maintains a clear picture if this mode is activated.
-
OFF : Deactivates the SENS-UP function.
-
AUTO : Activates the SENS-UP function.
RETURN : Return to the SETUP menu.
If you press the Function Setup switch in 'AUTO' mode, You can adjust brightness by adjusting
the SENS-UP level. (x2 ~ x512)
Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.
It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the
D-ZOOM level is increased.
SSDR (Samsung Super Dynamic Range) :
SSDR illuminates darker areas of an image while retaining the same light level for brighter areas
to even out the overall brightness of images with high contrast between bright and dark areas.
1.
When the SETUP menu screen is displayed,
select SSDR by using the Function Setup
switch so that the arrow indicates
OFF : Deactivates the SSDR function.
ON : Activates the SSDR function.
- Use the Function Setup button to change the SSDR level in the sub menu according
to the contrast between bright and dark areas.
the greater the noise.
1. LEVEL
'SSDR'.
SSDR SETUP
8
Press SET to Return
English_21
Advertisement
Table of Contents
