Connecting The Dlan 200 Avduo; Software Installation; Software For Windows - Devolo dLAN 200 AVduo Quick Manual

16 Installation
devolo dLAN 200 AVduo
Please note that all dLAN AV devices
to be connected to your network are
also connected to your household
electrical wiring. A dLAN AV device
switches to Standby mode after a
short while if no active network de-
vice such as a computer is connected
to the network port. In Standby mode,
the dLAN AV device cannot be ac-
cessed via the power supply grid. As
soon as the network device (e.g. com-
puter) connected to the network inter-
face is switched on again, your dLAN
AV device can also be reached again
via the electrical wiring.
3.4 Connecting the
dLAN 200 AVduo
This section describes how to connect your
dLAN 200 AVduo to a computer and/or other network
device.
Use the included network cable to connect the
dLAN 200 AVduo to the network port of your run-
ning computer and/or other network device.
Plug the dLAN 200 AVduo into a free electrical
outlet.
Once you have connected at least two dLAN AV
adapters as described above, your dLAN AV net-
work has been set up. To secure your dLAN AV
network, continue with the configuration as
described in chapter 4 dLAN network.

3.5 Software installation

3.5.1 Software for Windows

Use the installation wizard to install the devolo softwa-
re for using the adapter with the Windows operating
system:
b
devolo dLAN Cockpit finds all reachable dLAN
adapters in your dLAN AV network, displays infor-
mation about these devices and encrypts your
dLAN AV network individually.
To install the software, insert the included CD-ROM in
the CD drive of your computer.
If autoplay is installed on your computer, the
installation will start automatically. Otherwi-
se, open the folder with the Windows Explo-
rer by right-clicking on Start (or the Windows
logo) and selecting Windows Explorer from
the context menu. Double-click to start the
installation wizard manually.