Functions - Devolo dLAN 200 AVduo Quick Manual

Please note that dLAN devices such as
the devolo dLAN duo (14 Mbps) and
devolo dLAN Highspeed Ethernet II
(85 Mbps) can be used on the same
household electrical wiring as dLAN
AV devices (200 Mbps or 500 Mbps)
without interference, but they will not
be able to communicate directly with
one another. Hence, to set up a dLAN
AV network, you need two dLAN AV
devices (200 Mbps or 500 Mbps).
More valuable information about
dLAN or dLAN AV is available on our
website at www.devolo.com.

3.3 Functions

The dLAN 200 AVduo has a monitoring light (LED),
two network jacks and an encryption button.
Monitoring light
The monitoring light (LED) shows all of the statuses for
the dLAN 200 AVduo by illuminating and/or flashing in
different ways:
b
The LED flashes at uniform intervals (of 2 s) if
the dLAN 200 AVduo is connected to the mains
supply but there is no dLAN connection.
b
The LED lights up if the dLAN 200 AVduo is
ready to operate and there is a dLAN connec-
tion.
b
The LED flashes quickly if the encryption process
(pairing) is being performed in the dLAN net-
work.
b
The LED flashes at irregular intervals (0.5 s/
2 s) if the dLAN 200 AVduo is in PowerSave
mode.
Network connections
These are the connection
dLAN 200 AVduo for connecting it to a computer and/
or another network device with the network cable (in-
cluded).
Encryption button
Data encryption at the touch of a button; For more in-
formation on the functions of the encryption button,
please see the chapter 4.3 dLAN AV network en-
cryption at the touch of a button.
devolo dLAN 200 AVduo
Installation 15
points on the