Connecting The Microlink Dlan Duo; Via Ethernet; Via Usb - Devolo MicroLink dLAN duo Manual

12
Connection and installation
2.3

Connecting the MicroLink dLAN duo...

In this section, we will show you how to connect the MicroLink dLAN duo—
either via Ethernet or USB. If both are installed, USB has priority.
Before connecting the MicroLink dLAN duo please note its security ID and
keep it available for configuration of the network. The security ID can be
found on the bottom of the dLAN adapter.
2.3.1

...via Ethernet

No drivers are required for installation of the MicroLink dLAN duo adapter.
2.3.2

...via USB

Driver installation...
The MicroLink dLAN duo supports plug&play. This makes installation much
easier. Windows wizards guide you through the installation process and
request the required data.
...under Windows 98
|
devolo MicroLink dLAN duo
|
With the computer running connect the MicroLink dLAN duo adapter to
an Ethernet port of the computer with the network cable (included).
Plug the MicroLink dLAN duo adapter into a convenient power socket.
Then install the devolo MicroLink dLAN Software. For more information
see the 'devolo MicroLink dLAN Software' chapter.
With the computer running connect the MicroLink dLAN duo adapter to a
USB port of the computer with the USB cable (included).
Plug the MicroLink dLAN duo adapter into a convenient power socket.
Now install the drivers in the desired operating system.
Then install the devolo MicroLink dLAN Software. For more information
see the 'devolo MicroLink dLAN Software' chapter.
Put the devolo product CD in your CD-ROM drive.
Windows starts the hardware wizard and reports that new hardware has
been detected. Confirm by clicking Next.
|