Connecting The Dlan Pro 1200+ Poe - Devolo dLAN pro 1200+ PoE Manual

3.4 Connecting the
dLAN pro 1200+ PoE
This section describes how to connect your
dLAN pro 1200+ PoE to a computer or other network
device.
For the permitted voltage range for
operating the device and the power
consumption, refer to the label on
the rear of the device. For more
technical specifications, refer to the
product sheet online at
www.devolo.com/en/business-solutions.
Connect the dLAN pro 1200+ PoE to the network
jack of your computer or network device using a
network cable.
Prevent tripping hazards when ca-
bling.
Plug the dLAN pro 1200+ PoE into an available
power socket.
Initial use 21
The power socket and all connected
network devices should be easily ac-
cessible so that you can pull the
mains plug quickly if needed.
To disconnect the device from the
mains supply, pull the device itself or
its mains plug out of the electrical
socket.
Additional network devices that are connect-
ed via a power strip are connected to the
mains power supply by plugging the power
strip into the integrated electrical socket of
the dLAN pro 1200+ PoE.
Once you have connected at least two dLAN pro
devices as described above, your dLAN pro net-
work has been established. To secure your net-
work, continue with your network configuration.
For more information, refer to the chapter 4
dLAN pro network.
For detailed information about connecting
other devolo dLAN pro devices, visit:
www.devolo.com/en/business-solutions.
devolo dLAN pro 1200+ PoE