Connecting The Dlan 200 Avpro Mini - Devolo dLAN 200 AVpro mini Manual

16 Installation
devolo dLAN 200 AVpro mini
puter is connected to the network port. In Standby
mode, the dLAN AVpro device cannot be ac-
cessed via the power supply grid. As soon as the
network device (e.g. computer) connected to the net-
work interface is switched on again, your dLAN AVpro
device can also be reached again via the electrical wir-
ing.
If you would like to ensure that a dLAN AVpro adapter
does not switch to energy saving mode, this func-
tion can be deactivated in the dLAN AVpro manager
software. More information concerning "energy saving
mode" can be found in the chapter 2.2 devolo—Up
to speed on green IT.
In order to reactivate the function
in the dLAN AVpro manager at a lat-
er point, the adapter has to first be
unplugged and plugged back in.
3.4 Connecting the
dLAN 200 AVpro mini
This section describes how to connect your
dLAN 200 AVpro mini to a computer or other network
device.
Use the included network cable to connect the
dLAN 200 AVpro mini to the network port of your
running computer or other network device.
Plug the dLAN 200 AVpro mini into a free electri-
cal outlet.
Please note that all dLAN AV devic-
es to be connected to your network
are also connected to your house-
hold electrical wiring.
As soon as at least one other dLAN AVpro adapter
has been connected and plugged into the mains
supply, a dLAN network is set up. You can use the
devolo dLAN AVpro manager, the encryption
button to secure your dLAN network from unau-
thorised access. For information on how to pro-
ceed, please read further in Chapter 4 dLAN
network.
For detailed information about connecting
other devolo dLAN adapters, visit our web-
site: www.devolo.com