Sony HDR-XR1 00 Operating Manual page 162

GENERAL SET
The default settings are marked with
When your camcorder is connected to a wall outlet (wall socket), a demonstration movie
appear about 10 minutes after you turn on the
Steps.
.
1t
ill·
(HOME)- (SETIINGS) .... [GEr-JERAL SETL- [DEMQ MODE] - a
"r;::;v,
.
- LQ!SJ
~
ON
OFF
<D
Notes
• You can find the demonstration movie on the VISUAL INDEX screen in the default setting. The
demonstration movie will not be restored once it is deleted.
• Meanwhile, a movie you have recorded will be registered as the demonstration movie if the movie
satisfies the following conditions.
- The movie is protected
- The movie is the first one displayed on the VISUAL INDEX screen
- The movie is recorded on the internal hard disk
- The movie is recorded with high definition image quality (HD)
f)Tips
• When you set this item to [aNI and touch
• The demonstration will be suspended:
- When you press START/STOP or PHOTO
- When you touch the screen during the demonstration (The demonstration starts again after about 10
minutes)
- When you turn on the
1t
- When you press (HOME) or [E (VIEW IMAGES)
You can make the camera recording lamp on the front of your camcorder not to turn on.
Steps
1t ill
(HOME)--'; (SETIINGS)
[QRJ-lEJ-OO
~ ON
OFF
(Other setup items)
~.
.
. . .
The demonstration appears.
The demonstration does not appear.
[QRJ,
the demonstration starts playing.
Q
(Photo) lamp
[GENERAL SET] - [REC LAMP] - a desired setting
-+
The camera recording lamp lights up.
The camera recording lamp does not light up.
1:1
(Movie) lamp by pressing MODE.
.
'" .
c
96
desired setting'
..
-+