Sony HDR-XR1 00 Operating Manual page 120

When connecting to yourTV via a VCR
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable.
Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
When yourTV is monaural (When yourTV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.
<D
Notes
AN
• When the connecting cable is used to output images, images are output with standard definition
image quality (SD).
0Tips
• If you connect your camcorder to the TV using more than one type of cable to output images, the order
of priority of the TV input jacks is as follows:
HDMI -. component -. S VIDEO -. video
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
You can operate your camcorder with the Remote Commander of your TV by connecting
your camcorder to a "BRAVIA" Sync compatible TV launched in
cable.
Connect your camcorder and a
cable (sold separately).
Turn on your camcorder.
The TV input is switched automatically, and the image of your camcorder is displayed
on the TV.
1lII>-=I1==(JJ!J~' ~~~~
t.l;;;;;;;;;;;;;;;;;;;;;::J
cable
HDMI
liB
RAVIA" Sync compatible TV with the HDMI
54
or later with the HDMI
2008
/I)}j¥