Sony HDR-XR1 00 Operating Manual page 175

The imaging field looks different.
• The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The flash does not work (HDR-XR200/
XR200V).
• You cannot record with the flash when
capturing photos while shooting a movie.
• Even if auto flash or
@
reduction) is selected, you cannot use the
flash with:
- NightShot
- [SPOT MTRlFCS]
- [MANUAL] in [EXPOSURE]
- [SPOT METER]
- [TWILIGHT], [CANDLE],
[SUNRISE&SUNSET], [FIREWORKS],
[LANDSCAPE], [SPOTLIGHT], [BEACH] or
[SNOW] in [SCENE SELECTION]
The actual recording time for movies is
less than the expected recording time of
the recording media.
• Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 117).
The camcorder stops operating.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
• The temperature of your camcorder is
extremely low. Turn off your camcorder and
take to a warm place. Leave the camcorder
it
there for a while, then turn on the camcorder
• If you keep applying vibration on the
camcorder, recording may stop.
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
• On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
(Auto redeye
recording movie starts/stops. This is not a
malfunction.
The horizontal to vertical ratio of the
movie (16:9 (wide)/4:3) cannot be
changed.
• The horizontal to vertical ratio of high
definition image quality (HD) movies is 16:9
(wide).
The auto focus does not function.
• Set [FOCUS] to [AUTO] (p. 101).
• The recording conditions are not suitable for
auto focus. Adjust the focus manually (p. 101).
SteadyShot does not function.
For HDR-XRIOO/XRIOI
• Set [ItlISTEADYSHOT] to [ON] (p. 76).
• Even if [ItlI STEADYSHOT] is set to
[ON], your camcorder may not be able to
compensate for excessive vibrations.
For HDR-XR200/XR200V
• Set [ItlISTEADYSHOT] to [ACTIVE] or
[STANDARD], [OSTEADYSHOT] to [ON]
(p. 76, 81).
• Even if [ItlISTEADYSHOT] is set to
[ACTIVE] or [STANDARD], or
[OSTEADYSHOT] is set to [ON], your
camcorder may not be able to compensate for
excessive vibrations.
The subjects passing by the screen very
fast appear crooked.
• This is called the focal plane phenomenon.
This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
The color of the image is not correctly
displayed (HDR-XR200/XR200V).
• Press NIGHTSHOT (p. 36).
109